En
English
Français
Español
Velvet Lounge Chairs with Black Legs
This lounge chair uses a velvet-upholstered seat and backrest mounted on a matte black metal leg frame. The velvet is a 100% polyester pile fabric with a pile height of 1.8 mm and a weight of 320 g/m², rated at 45,000 Martindale cycles. The seat uses a 45 kg/m³ high-resilience foam base with a 25 kg/m³ soft top layer, and the backrest uses a 32 kg/m³ foam layer over a molded plywood shell. The black leg frame is made of 22 mm steel tube with a 1.5 mm wall thickness, finished with a matte black powder coating that resists fingerprints and scuffs. The chair is intended for hotel lobbies, bars, lounges, club rooms, and premium residential spaces where velvet texture and a black metal base are both required.
Core Advantages
Velvet Pile Durability
The 1.8 mm pile height and 45,000 Martindale rating allow the velvet surface to maintain appearance through repeated seating in commercial lounges.
Matte Black Frame Finish
Powder coating with a matte surface reduces visible fingerprints and scuffs compared to gloss finishes, which is relevant for high-contact areas.
Layered Seat Construction
A firm 45 kg/m³ base layer maintains seat height, while a 25 kg/m³ top layer distributes pressure across the contact area during long sitting periods.
Defined Chair Profile
The combination of a velvet body and a thin black metal leg frame creates a visual separation between the upholstered mass and the floor plane.
Product Features
Application Scenarios
Lobby seating clusters where velvet texture contributes to the interior palette and the black leg frame coordinates with side tables and floor lamps.
Seating where guests remain for 45 to 90 minutes and the velvet surface resists compression marks between seatings.
Reading rooms and card rooms where the chair profile is visible from multiple angles and the matte frame finish reduces glare from overhead lighting.
Fitting areas and consultation zones where velvet upholstery is used to align with seasonal display themes and brand color palettes.
Common Questions and Solutions
How does velvet hold up in commercial use?
How should velvet be cleaned?
Can the black leg frame be replaced?
Is the chair suitable for outdoor use?
What velvet colors are available?
Notes for Installation and Use
Inspect the velvet surface for compression marks on delivery. Compression marks from packaging typically recover within 48 hours after unpacking.
Place the chair on level flooring. The black leg frame has fixed glides and does not include height adjustment.
Avoid placing the chair within 500 mm of direct heat sources or radiators. Velvet pile may be affected by sustained heat exposure.
Do not stack these chairs. The velvet surface and black frame can be damaged by contact with other chairs during stacking.
