En
English
Français
Español
This accent chair uses a PU leather upholstered seat and backrest mounted on a matte black metal frame. The PU leather is a 1.2 mm thick polyurethane surface bonded to a knitted polyester backing, rated at 60,000 Martindale cycles and tested for resistance to alcohol, coffee, and cleaning agents. The seat uses a 50 kg/m³ high-resilience foam core with a 28 kg/m³ top layer. The backrest is shaped with a 7-degree recline and a 25 mm lumbar pad. The black frame is made of 25 mm steel tube with a 1.5 mm wall thickness and a matte black powder coating. The chair is intended for hotel lobbies, reception areas, restaurant waiting zones, and clinical waiting rooms where upholstery must be wiped clean between users.
Product Features
Core Advantages
Wipe-Clean Surface
The PU leather surface resists alcohol, coffee, and standard cleaning agents. Surfaces can be wiped between users without saturating the foam layers, which suits waiting areas with high turnover.
60,000 Martindale Rating
The PU surface is rated at 60,000 Martindale cycles, which is higher than woven fabric options and suits continuous-use environments where seat replacement cycles are planned over multiple years.
Defined Black Frame Profile
The 25 mm steel tube frame with a matte black finish provides a visual separation between the upholstered seat mass and the floor plane, which suits interiors with dark metal fixtures.
Layered Foam Construction
A 50 kg/m³ seat base maintains seat height over time, while a 28 kg/m³ top layer distributes pressure across the contact area during 30 to 60 minute sitting periods.
Replaceable Seat Cushion
The seat cushion is attached with four screws and can be removed for replacement without ordering a complete chair. This is relevant for projects that specify phased refurbishment.
Application Scenarios
Lobby seating where upholstery must be wiped between guests and the black frame coordinates with luggage carts and door hardware.
Office and clinic reception seating where visitors may remain for 30 to 60 minutes and surfaces must resist cleaning agents.
Entrance seating where food and drink spills are possible and the PU surface can be cleaned between diners.
Medical and dental waiting areas where upholstery is cleaned between patients and the black frame suits clinical interior specifications.
Seating areas with continuous turnover where PU leather supports wipe-down cleaning and maintains appearance through repeated use.
Common Questions and Solutions
How does PU leather compare to fabric for commercial use?
How should PU leather be cleaned and maintained?
Can the PU leather color be matched to a project palette?
Is the chair suitable for outdoor use?
Can the seat cushion be replaced separately?
What is the ordering lead time and MOQ?
Contract and Specification Notes
Notes for Installation and Use
Inspect the PU surface for transit marks on delivery. Surface marks from packaging typically recover within 24 hours after unpacking.
Place the chair on level flooring. The frame has fixed glides and does not include height adjustment.
Avoid placing the chair near direct heat sources or radiators. PU leather may harden or crack under sustained heat exposure.
Do not use solvent-based cleaners, bleach, or abrasive pads on the PU surface. These can break down the surface coating.
Inspect the frame-to-seat connection and the frame welds every 6 months in continuous-use venues. Tighten screws if movement is detected.
