En
English
Français
Español
Contemporary Dining Chairs with Upholstered Seats
This contemporary dining chair pairs a slim upholstered seat with a minimalist frame, designed for commercial dining rooms that require a clean profile and consistent upholstery across large seating counts. The seat is 460 mm wide and 440 mm deep, using a 40 kg/m³ high-resilience foam base covered with a 25 kg/m³ comfort layer. The upholstery is a woven polyester blend rated at 35,000 Martindale cycles, available in 18 standard colors. The frame is a 20 mm square steel tube with a 1.2 mm wall thickness, powder-coated in black, white, or custom RAL colors. Four nylon glides are fitted as standard. The chair is intended for restaurants, hotel dining rooms, banquet halls, and corporate dining facilities where seat height, upholstery, and frame finish must be specified together.
Core Advantages
Consistent Upholstery Across Volume Orders
Standardized foam densities and fabric specifications allow repeat orders to match the original batch without visible differences in seat feel or color across a dining room.
Slim Frame Profile
The 20 mm square tube frame reduces visual bulk compared to round tube or solid wood frames, which suits dining rooms with closely spaced tables.
Replaceable Seat Cushion
The seat cushion is attached with four screws and can be removed for reupholstery or replacement without ordering a complete chair.
Fabric Color Consistency
18 standard fabric colors are produced in continuous dye lots. Color samples are retained for repeat orders to maintain consistency across phased projects.
Product Features
Application Scenarios
Seating where table spacing is fixed and the slim frame allows chairs to be pushed under tables without occupying aisle space.
Seating with high turnover where fabric and foam specifications support cleaning between guest sessions.
Stackable seating for events that require rapid setup and teardown, with frame finishes matching table and staging specifications.
Staff dining rooms and executive dining areas where upholstery color must align with corporate interior standards.
Seating where the contemporary frame profile and upholstered seat support a defined interior concept across multiple locations.
Common Questions and Solutions
Notes for Installation and Use
Inspect all four glides before placing the chair in service. Replace missing or worn glides to prevent the frame from contacting the floor.
Do not drag the chair on hard floors. Lift the chair when moving it to avoid damaging the powder coating and glides.
When stacking, do not exceed 5 units. Ensure the stack is on a stable base and away from walkways and exits.
For continuous-use venues, inspect the frame welds and seat mounting screws every 6 months and tighten if required.
