Velvet Solid Bar Stool with 4 Black and Gold Legs

The velvet solid bar stool features a four-leg base constructed from steel tubing with a black powder coat and gold-finished accents on the leg joints and footrest rings. The seat and backrest are upholstered in polyester velvet fabric with a dense foam filling. The stool is designed for counter-height and bar-height surfaces ranging from 100 cm to 110 cm. The frame geometry incorporates a cross-shaped leg configuration that distributes vertical load across four points. The gold metallic finish is applied through an electroplating process with a layer thickness of 8 to 10 microns. The stool does not include a swivel or height adjustment mechanism; the seat height is fixed at 66 cm from floor level. Each leg includes a floor protector made of polypropylene to reduce scratching on hard surfaces. The velvet cover has a Martindale abrasion rating of 35,000 cycles, suitable for residential and light commercial use.

Core Advantages

Four-leg steel frame design with black powder coating (thickness 70 microns) and gold electroplated accents on leg connectors and footrest ring.
Fixed seat height of 66 cm, compatible with bar tops between 100 cm and 107 cm (standard clearance of 34-41 cm from seat to underside of bar).
Load capacity: 150 kg static weight, tested according to EN 16139:2013 level 1 (residential and contract use).
Seat dimensions: width 42 cm, depth 40 cm, backrest height 26 cm from seat surface.
Velvet fabric: 100% polyester, weight 320 gsm, colorfastness rating 4 (scale 1-5) against UV exposure up to 200 hours.
Foam density: seat cushion 50 kg/m³, backrest 45 kg/m³, compression deflection (ILD) 160 N for seat and 110 N for back.

Product Characteristics

Frame material: cold-rolled steel tube, diameter 25 mm for legs, wall thickness 1.5 mm.
Gold finish: electroplated brass-color coating over nickel underlayer, corrosion resistance tested for 48 hours salt spray (ISO 9227).
Floor protectors: non-slip polypropylene caps, height 4 mm, replaceable when worn beyond 2 mm.
Footrest ring: integrated into leg structure at 24 cm from floor, steel with gold electroplated finish.
Assembly required: legs attach to seat plate via M8 bolts (included torque wrench set to 6 Nm).
Product weight: 8.7 kg, packed weight 10.2 kg.
Seat construction: plywood base plate (12 mm thickness) with glued foam and fabric stapled to underside.

Application Scenarios

Home bar counters with heights between 100 cm and 108 cm, where fixed-height seating provides consistent positioning.
Kitchen islands designed for casual dining with overhang edge for leg clearance.
Restaurant bar areas requiring non-swivel seating to maintain uniform orientation toward the bar front.
Hotel lounge corners where decorative velvet finish complements interior design palettes.
Wine tasting rooms and cellar bars where leg cross design reduces floor space obstruction.
Coffee shop high tables (106 cm standard) where fixed leg stools optimize seating density.

Technical Specifications

Product type	Velvet solid bar stool with 4 black and gold legs
Seat height (floor to seat top)	66 cm (fixed)
Overall height	92 cm
Seat width / depth	42 cm / 40 cm
Backrest dimensions	41 cm width x 26 cm height
Footrest ring height	24 cm from floor
Leg configuration	4-leg cross base, leg spread 54 cm diagonal
Maximum load capacity	150 kg (EN 16139:2013 level 1)
Frame finish	Black epoxy powder coat (RAL 9005) + gold electroplated accents
Fabric composition	100% polyester velvet, 320 gsm
Foam density	Seat: 50 kg/m³, back: 45 kg/m³
Net weight / gross weight	8.7 kg / 10.2 kg
Packaging dimensions	66 x 48 x 32 cm (carton box)

Frequently Asked Questions & Maintenance Notes

What is the recommended counter height for this bar stool?

For the 66 cm seat height, the optimal bar or counter surface height ranges from 100 cm to 107 cm. This provides a knee clearance of 34 cm to 41 cm between the seat top and the underside of the bar. For counter-height surfaces at 90-95 cm, a lower stool model is recommended as the 66 cm height would create insufficient leg room.

How to clean the velvet fabric without damaging the material?

Vacuum the velvet using an upholstery attachment with low suction. For liquid spills, blot immediately with a dry white cloth; do not rub. For stain removal, use a solution of water and mild detergent (pH 6-8) applied with a microfiber cloth. Avoid steam cleaning or soaking the fabric. The velvet has a directional nap; brushing in one direction restores the pile appearance after cleaning.

How to maintain the gold electroplated finish on the legs?

Clean the gold-plated surfaces with a soft damp cloth and mild soap. Avoid abrasive cleaners, scouring pads, or acidic solutions (pH below 5) which may strip the plating. The gold layer thickness is 8-10 microns over nickel. In humid environments, periodic wiping with a dry cloth prevents oxidation spots. Do not use metal polishes containing ammonia.

Is assembly required, and what tools are needed?

Assembly is required. The stool ships with the seat unit, four legs with pre-attached footrest ring, and a set of M8 x 30 mm bolts (8 pieces). The included hex key (5 mm) is used to fasten the bolts through the leg brackets into the seat plate. Torque specification: 6 Nm. Average assembly time is 10-12 minutes. Do not use power tools exceeding 10 Nm to avoid stripping the bolt threads.

Does the stool wobble on uneven floors?

The four legs are manufactured with a tolerance of ±2 mm in length. For floor unevenness up to 5 mm, the polypropylene floor protectors provide minor compliance. For larger irregularities, the stool may exhibit a rocking motion. Adjustable floor glides are not included in this model. Placing felt pads of varying thickness under the legs can compensate for floor slope or depressions.

What is the weight limit and stability rating?

The stool has been tested to 150 kg static load according to EN 16139:2013 level 1 (residential and light contract use). Stability testing per EN 1022:2018 indicates that no tipping occurs when a horizontal force of 20 N is applied at the seat edge at maximum load. Users exceeding 130 kg should avoid leaning more than 20 degrees to the side, as the four-leg footprint (54 cm diagonal spread) provides less lateral stability than five-leg base designs.

Operational Limitations & Safety Parameters

Do not stand on the seat or use the stool as a ladder. The velvet upholstery and foam are not designed for point loads from footwear.
The gold electroplated finish is decorative and may show wear from repeated contact with belt buckles or sharp objects. Avoid dragging the stool by the footrest ring.
Check leg bolts every 3 months for tightness. Re-torque to 6 Nm if any bolt has loosened. Loose bolts may cause structural instability.
Avoid exposure to direct sunlight for extended periods (more than 4 hours daily) as velvet fabric may fade. Colorfastness rating 4 indicates moderate resistance.
The stool is rated for indoor use only. Do not place in outdoor environments where humidity exceeds 70% or temperatures drop below 5°C, as steel corrosion and foam hardening may occur.
Maximum recommended continuous sitting duration: 4 hours, after which the foam may show temporary compression (recovery time 2-4 hours).

Additional Dimensional Data

Leg tip to leg tip (diagonal spread)	54 cm
Leg tip to leg tip (adjacent legs)	38 cm
Floor clearance under seat	64 cm (from floor to seat bottom edge)
Seat thickness (including foam and plywood)	8 cm
Backrest tilt angle relative to vertical	6 degrees fixed
Distance between leg brackets at seat plate	32 cm (center to center)
Floor protector diameter	2.8 cm

Item No	DM-W002886578
Description	black velvet counter height stools
Dimension	524698cm
Packing	2pc/ctn
Carton Dimension	624651cm
Net weight	7.3
Gross weight	16.5
Quantity Per Container	930 pcs/HQ
Price Per Item	28.6$
Material	Velvet fabric, Black Power Coating Legs
Color	available for any color