Swivel Dining Chair Modern Style Armchair Side Fabric Chair – Product Documentation

The swivel dining chair combines a 360-degree rotation mechanism with a modern armchair silhouette. The frame is constructed from powder-coated steel with a matte black finish. The seat and backrest are upholstered in polyester fabric with polyurethane foam padding. The chair includes a built-in swivel plate integrated into the seat base, allowing full rotation without a separate base mechanism. The armrests are fixed at 22 cm above the seat surface. The chair is designed for dining tables between 72 cm and 76 cm in height. The fabric has a Martindale abrasion rating of 40,000 cycles. The swivel mechanism uses a ball-bearing raceway rated for 60,000 cycles under 110 kg load. The chair does not include height adjustment or casters. Maximum static load capacity is 120 kg.

Core Advantages

Swivel mechanism: 360-degree continuous rotation via sealed ball-bearing raceway. Rotation torque 6 Nm, providing smooth motion without free spinning.

Frame material: steel tube, diameter 22 mm, wall thickness 1.8 mm, powder coated matte black (RAL 9005), thickness 70 microns.

Seat height: 48 cm from floor, fixed (non-adjustable). Compatible with standard dining tables 72-76 cm.

Armrests: fixed position, height 22 cm from seat, width 6 cm, padded with 2 cm foam.

Fabric composition: 100% polyester, 340 gsm, stain-resistant fluorocarbon treatment. Water contact angle 112 degrees.

Foam density: seat 55 kg/m³ (ILD 180 N), backrest 48 kg/m³ (ILD 130 N). Seat thickness 7 cm.

Load capacity: 120 kg static, tested to BIFMA X5.1-2017 section 10 and 11.

Product Characteristics

Seat dimensions: width 50 cm, depth 46 cm. Backrest height 38 cm from seat surface.
Overall dimensions: 56 cm (W) x 58 cm (D) x 83 cm (H).
Armrest dimensions: length 28 cm, width 6 cm, fixed at 22 cm height.
Leg configuration: four legs, leg spread 48 cm front to back, 46 cm side to side.

Swivel mechanism: integrated into seat plate, height 4 cm, steel housing.
Floor glides: nylon caps, 3 mm thickness, replaceable.
Assembly: partial assembly required (legs attach to seat frame).
Product weight: 9.8 kg. Shipping weight: 11.5 kg.

Application Scenarios

Modern dining rooms with swivel functionality Kitchen islands and breakfast nooks Coffee shop seating requiring rotation Restaurant booths and side seating areas Home office side chairs for guest seating Small apartment dining sets

Technical Specifications

Product classification	Swivel dining chair / armchair / side fabric chair
Seat height (floor to seat top)	48 cm (fixed)
Overall height	83 cm
Seat dimensions (W x D)	50 cm x 46 cm
Backrest dimensions (W x H)	48 cm x 38 cm
Armrest height from seat	22 cm (fixed)
Swivel rotation range	360 degrees continuous
Maximum static load	120 kg (BIFMA X5.1-2017)
Frame material / finish	Steel tube / matte black powder coat (RAL 9005)
Fabric composition / abrasion	100% polyester, 340 gsm, Martindale 40,000 cycles
Foam density (seat / back)	55 kg/m³ / 48 kg/m³
Swivel mechanism rating	60,000 cycles at 110 kg
Fire compliance	BS 5852 source 0 (cigarette test)
Net weight / shipping weight	9.8 kg / 11.5 kg
Packaging dimensions (carton)	68 x 58 x 42 cm (LxWxH)

Frequently Asked Questions & Maintenance

What table height works with this swivel dining chair?

The 48 cm seat height is compatible with dining tables from 72 cm to 76 cm floor-to-tabletop. This provides 24-28 cm clearance from seat to table underside. For tables above 78 cm, the armrests may contact the table apron when swiveling.

How does the swivel mechanism perform over time?

The sealed ball-bearing raceway is rated for 60,000 full rotation cycles under 110 kg load. Based on 20 rotations per meal (three meals daily), this corresponds to approximately 5 years of use. No lubrication is required for the sealed mechanism. If squeaking occurs, replace the swivel unit rather than attempting disassembly.

How to clean the fabric upholstery?

Vacuum weekly using an upholstery brush attachment. For stains, mix 5 ml mild detergent (pH 6-8) with 500 ml lukewarm water. Apply with a white microfiber cloth using blotting motions. Do not rub. Allow to air dry away from direct heat. The stain-resistant coating withstands 15 to 20 cleaning cycles.

What assembly is required?

Partial assembly required. The four legs attach to the seat frame using M8 x 25 mm bolts. Included tools: hex key (5 mm) and a wrench. Assembly time: 12 minutes. Torque specification: 7 Nm. Do not exceed 10 Nm. The swivel mechanism comes pre-assembled to the seat plate.

Is the chair suitable for daily dining use?

Yes. The chair has passed BIFMA X5.1-2017 cycle tests: 100,000 seat load cycles at 120 kg. The fabric Martindale rating of 40,000 cycles corresponds to heavy residential use (approximately 8-10 years of daily sitting). For commercial restaurant use, inspect leg bolts every 6 months.

Operational Limitations & Safety Parameters

Maximum load: 120 kg. Exceeding this limit may cause deformation of the swivel raceway or leg joint loosening.
Do not stand on the seat or use as a step stool. The swivel mechanism is not designed for vertical point loads above 50 kg.
Avoid applying sudden rotational force exceeding 20 Nm to the armrests, as this may damage the swivel lock detents.
Inspect leg bolts every 3 months. Re-torque to 7 Nm if any looseness is detected.
Keep the fabric away from open flames. The material meets cigarette ignition standards but will burn if exposed to direct flame above 400°C.
Do not use on uneven floors where difference between leg contact points exceeds 4 mm, as this may cause rocking during swivel motion.

Supplementary Dimensional Data

Armrest pad dimensions (L x W)	28 cm x 6 cm, foam thickness 2 cm
Distance between armrests (inner)	48 cm
Leg spread (front to back)	48 cm
Leg spread (side to side)	46 cm
Floor to seat bottom clearance	41 cm
Swivel mechanism thickness	4 cm (between seat and leg frame)

Product Dimensions：

Dimension Measurement	Size
Overall Height	32.7" (83.1 cm)
Seat Height	17.9" (45.5 cm)
Seat Width	18.1" (46 cm)
Seat Depth	17.3" (44 cm)
Backrest Height	18.1" (46 cm)
Overall Width	24.4" (62 cm)
Overall Depth	23.6" (60 cm)
Weight Capacity	300 lbs (136 kg)
Net Weight	Approx. 10–11 kg

Company Profile/Product Description

Elegant Comfort Meets Functional Design

Upgrade your seating experience with this swivel upholstered dining chair, where sleek aesthetics meet daily functionality. Designed with a modern curved back, plush cushioning, and a 360-degree rotation base, this chair offers the perfect combination of comfort and sophistication.

Tailored for global B2B buyers, this piece is a top choice for furniture importers, wholesalers, hospitality project buyers, and e-commerce retailers in markets such as the United States, United Kingdom, Canada, and Australia.

Why You'll Love It:
● 360° Swivel Base — Smooth and silent, ideal for dining rooms, home offices, or reception spaces
● Modern Silhouette — The sculpted barrel back design creates a visually striking yet space-efficient profile
● Premium Materials — Upholstered in skin-friendly velvet fabric with high-resilience foam padding
● Sturdy Structure — Built on a certified engineered wood frame with a wide pedestal base; supports up to 300 lbs
● Multi-Scene Use — A versatile fit as a side chair, lounge chair, vanity chair, or accent piece in modern interiors

Whether you're sourcing for a furniture collection, designing a hotel suite, or building a private-label seating line, this upholstered swivel armchair delivers the quality and aesthetic appeal your buyers expect.

Available in classic green and refined linen colors, with full OEM/ODM customization support, this chair is your reliable solution for bulk orders and international procurement.
Looking for a trusted velvet chair manufacturer and B2B supplier in China?

Contact Anji Duomei Intelligence Furniture Technology Co., Ltd. today — your partner in quality, style, and global furniture solutions.