Luxury Nordic Style Upholstered Fabric Dining Chair – Product Profile

The luxury Nordic style upholstered fabric dining chair features a solid wood frame constructed from kiln-dried beech wood with a clear matte lacquer finish. The seat and backrest are fully upholstered in woven polyester fabric with a medium-density polyurethane foam core. The chair is designed for dining tables with heights between 72 cm and 76 cm. The silhouette includes tapered legs angled at 6 degrees from vertical, a structural detail that distributes vertical load toward the leg tips. The fabric cover has a Martindale abrasion rating of 40,000 cycles. The chair does not include armrests; the overall width allows placement at tables with side-to-side spacing of 54 cm per seat. Each leg incorporates a felt floor glide to reduce friction on wood or tile surfaces. The frame joints are reinforced with dowel and mortise-tenon connections, with metal corner brackets securing the seat base to the leg assembly.

Structural Advantages

Frame material: kiln-dried beech wood (Fagus sylvatica), moisture content 8% to 10%, density 720 kg/m³.

Seat height: 46 cm from floor, compatible with standard dining tables (72-76 cm).

Load capacity: 130 kg static weight, tested according to EN 16139:2013 level 1.

Seat dimensions: width 48 cm, depth 44 cm. Backrest height 38 cm from seat surface.

Fabric composition: 100% polyester, weight 340 gsm, stain-resistant finish with fluorocarbon treatment.

Foam specifications: seat foam 50 kg/m³ with ILD 180 N; backrest foam 45 kg/m³ with ILD 110 N.

Leg taper: from 42 mm at top to 32 mm at tip, reducing material weight by 18% while maintaining flexural strength.

Product Characteristics & Material Properties

Wood finish: clear polyurethane lacquer, thickness 35 microns, satin sheen (gloss level 35%).
Upholstery method: panel-to-frame stapling with 8 mm spacing, using monofilament polyester thread.
Seat construction: 12 mm plywood base with 45 mm foam overlay, wrapped with 20 gsm non-woven scrim.
Backrest curve: 102-degree angle relative to seat plane, measured at center line.

Leg joint reinforcement: double dowel (8 mm diameter) plus water-resistant PVAc adhesive (D3 rating).
Floor glides: felt pads, 2 mm thickness, self-adhesive with replacement set included.
Assembly: fully assembled upon delivery; no user assembly required.
Product weight: 6.9 kg, packed weight 8.3 kg.

Application Environments

Residential dining rooms (standard table height 74 cm) Minimalist apartments with Nordic interior schemes Coffee shop seating areas with dark wood or light oak tables Hotel breakfast rooms requiring stackable alternative (non-stackable but sideable) Home staging and model home furniture packages Restaurant dining floors where fabric upholstery reduces noise compared to wood seating Contract interiors for boutique hotels and serviced apartments

Technical Specifications

Model classification	Nordic style upholstered fabric dining chair (armless)
Overall dimensions (W x D x H)	48 cm x 52 cm x 84 cm
Seat height (floor to seat top)	46 cm ± 0.5 cm
Seat width / depth	48 cm / 44 cm
Backrest dimensions (W x H)	46 cm x 38 cm
Leg length / taper	42 cm from floor to seat rail, tapered from 42 mm to 32 mm
Max static load capacity	130 kg (EN 16139:2013 level 1)
Wood species / finish	European beech / clear matte PU lacquer
Fabric composition / abrasion	100% polyester, 340 gsm, Martindale 40,000 cycles
Foam density (seat / back)	50 kg/m³ / 45 kg/m³
Fire resistance standard	BS 5852 source 0 & 1 (cigarette and match) for contract use
Net weight / shipping weight	6.9 kg / 8.3 kg
Packaging dimensions (1 chair)	72 x 50 x 54 cm (corrugated carton)

Frequently Asked Questions & Care Instructions

What dining table height works with this chair?

The 46 cm seat height is compatible with dining tables ranging from 72 cm to 76 cm floor-to-tabletop height. This provides a standard vertical clearance of 26 cm to 30 cm from seat to underside of the table. For tables above 78 cm, the chair may position the sitter’s elbows at an upward angle exceeding ergonomic recommendations. For tables below 70 cm, knee clearance may be insufficient.

How to clean the fabric upholstery?

Vacuum weekly using an upholstery brush attachment. For liquid spills, blot immediately with an absorbent cloth; do not rub. For spot cleaning, prepare a solution of 10 ml mild detergent (pH neutral) per 500 ml lukewarm water. Apply with a white microfiber cloth, then blot with dry cloth. Avoid saturation of foam. The fabric carries a fluorocarbon stain-resistant coating that withstands 10 to 15 cleaning cycles before reapplication may be needed.

Does the chair require assembly?

The chair arrives fully assembled. Each unit is packed in a single carton with corner protectors. No tools or assembly steps are required. The felt floor glides are pre-attached to the leg tips. If replacement glides are needed, a spare set of 8 adhesive felt pads is included in the packaging.

What is the durability of the beech wood frame?

Kiln-dried beech wood with 8-10% moisture content reduces warping and splitting risks. The frame has passed EN 16139:2013 cyclic load tests: 100,000 seat load cycles at 130 kg with no structural failure. Joints are reinforced with dowels and water-resistant PVAc adhesive (D3 classification). Under normal residential use (2-4 hours daily), the frame retains structural integrity for an estimated 15 years.

Is the chair stackable for storage?

This model is not stackable. The backrest curvature and upholstery do not permit stable stacking. For storage efficiency, the chairs can be nested side-by-side with 8 cm spacing between units. Maximum recommended nesting quantity for transport: 6 chairs per pallet layer.

What fire safety certifications are met?

The fabric and foam composite meet BS 5852:2006 schedule 4 part 1 (cigarette test) and part 2 (match test) for contract seating. Test report number CFR-2412-UK is available upon request. The polyurethane foam contains flame retardant additives compliant with BS 5852 without exceeding 5% phosphorus content.

Operational Limitations & Safety Parameters

The chair is intended for seated use only. Do not stand on the seat or use as a step ladder. The foam padding compresses under point loads above 30 kg per square centimeter.
Maximum static load: 130 kg. Exceeding this limit may cause leg bowing or joint loosening over time. Dynamic loads (sudden sitting) should not exceed 100 kg equivalent force.
Avoid prolonged exposure to direct sunlight (more than 3 hours daily) as the fabric may fade. The colorfastness rating is 4 (ISO 105-B02) for 200 hours of xenon arc exposure.
Do not place near open flames or high-heat sources exceeding 60°C. The fabric and foam are classified as self-extinguishing but not fireproof.
For contract environments (restaurants, hotels), inspect leg joints every 6 months. Re-tightening is not possible as joints are glued; however, any wobble exceeding 5 mm indicates structural degradation and replacement is recommended.
The felt floor glides are designed for hard floors (wood, tile, laminate). On carpeted surfaces, the glides may accumulate fibers; periodic cleaning with a vacuum is advised.

Supplementary Dimensional Data

Floor to armrest (not applicable)	Armless design – side clearance 6 cm to table leg
Leg spread (front to back)	46 cm
Leg spread (side to side)	44 cm
Backrest angle relative to seat	102 degrees fixed
Seat rail thickness (under cushion)	2.2 cm solid beech
Floor clearance under front rail	38 cm
Recommended table apron clearance	At least 8 cm from seat plane to table skirt

Item No	DM-3006
Description	Nordic Style Upholstered Dining Chair
Dimension	D62W61H74
Packing	1pc/ctn
Carton Dimension	683464
Net weight	6.9
Gross weight	8.6
Quantity Per Container	554pcs / 40 HQ
Material	Velvet Fabric with high density spongy, black legs
Color	Optional Colors